Add Upload Buffer

storagegateway_add_upload_buffer

R Documentation

Configures one or more gateway local disks as upload buffer for a specified gateway¶

Description¶

Configures one or more gateway local disks as upload buffer for a specified gateway. This operation is supported for the stored volume, cached volume, and tape gateway types.

In the request, you specify the gateway Amazon Resource Name (ARN) to which you want to add upload buffer, and one or more disk IDs that you want to configure as upload buffer.

Usage¶

storagegateway_add_upload_buffer(GatewayARN, DiskIds)

Arguments¶

GatewayARN: [required]
DiskIds: [required] An array of strings that identify disks that are to be configured as working storage. Each string has a minimum length of 1 and maximum length of 300. You can get the disk IDs from the list_local_disks API.

Value¶

A list with the following syntax:

list(
  GatewayARN = "string"
)

Request syntax¶

svc$add_upload_buffer(
  GatewayARN = "string",
  DiskIds = list(
    "string"
  )
)

Examples¶

## Not run: 
# Configures one or more gateway local disks as upload buffer for a
# specified gateway.
svc$add_upload_buffer(
  DiskIds = list(
    "pci-0000:03:00.0-scsi-0:0:0:0",
    "pci-0000:03:00.0-scsi-0:0:1:0"
  ),
  GatewayARN = "arn:aws:storagegateway:us-east-1:111122223333:gateway/sgw-12A3456B"
)

## End(Not run)