Upload Part
s3_upload_part | R Documentation |
Uploads a part in a multipart upload¶
Description¶
Uploads a part in a multipart upload.
In this operation, you provide new data as a part of an object in your
request. However, you have an option to specify your existing Amazon S3
object as a data source for the part you are uploading. To upload a part
from an existing object, you use the upload_part_copy
operation.
You must initiate a multipart upload (see create_multipart_upload
)
before you can upload any part. In response to your initiate request,
Amazon S3 returns an upload ID, a unique identifier that you must
include in your upload part request.
Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten.
For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide.
After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.
For more information on multipart uploads, go to Multipart Upload Overview in the Amazon S3 User Guide .
Directory buckets - For directory buckets, you must make requests
for this API operation to the Zonal endpoint. These endpoints support
virtual-hosted-style requests in the format
https://bucket_name.s3express-az_id.region.amazonaws.com/key-name
.
Path-style requests are not supported. For more information, see
Regional and Zonal
endpoints
in the Amazon S3 User Guide.
Permissions¶
-
General purpose bucket permissions - To perform a multipart upload with encryption using an Key Management Service key, the requester must have permission to the
kms:Decrypt
andkms:GenerateDataKey
actions on the key. The requester must also have permissions for thekms:GenerateDataKey
action for thecreate_multipart_upload
API. Then, the requester needs permissions for thekms:Decrypt
action on theupload_part
andupload_part_copy
APIs.These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information about KMS permissions, see Protecting data using server-side encryption with KMS in the Amazon S3 User Guide. For information about the permissions required to use the multipart upload API, see Multipart upload and permissions and Multipart upload API and permissions in the Amazon S3 User Guide.
-
Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the
create_session
API operation for session-based authorization. Specifically, you grant thes3express:CreateSession
permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make thecreate_session
API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make anothercreate_session
API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, seecreate_session
.
Data integrity¶
General purpose bucket - To ensure that data is not corrupted
traversing the network, specify the Content-MD5
header in the upload
part request. Amazon S3 checks the part data against the provided MD5
value. If they do not match, Amazon S3 returns an error. If the upload
request is signed with Signature Version 4, then Amazon Web Services S3
uses the x-amz-content-sha256
header as a checksum instead of
Content-MD5
. For more information see Authenticating Requests: Using
the Authorization Header (Amazon Web Services Signature Version
4).
Directory buckets - MD5 is not supported by directory buckets. You can use checksum algorithms to check object integrity.
Encryption¶
-
General purpose bucket - Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You have mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS), and Customer-Provided Keys (SSE-C). Amazon S3 encrypts data with server-side encryption using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption with other key options. The option you use depends on whether you want to use KMS keys (SSE-KMS) or provide your own encryption key (SSE-C).
Server-side encryption is supported by the S3 Multipart Upload operations. Unless you are using a customer-provided encryption key (SSE-C), you don't need to specify the encryption parameters in each UploadPart request. Instead, you only need to specify the server-side encryption parameters in the initial Initiate Multipart request. For more information, see
create_multipart_upload
.If you request server-side encryption using a customer-provided encryption key (SSE-C) in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following request headers.
-
x-amz-server-side-encryption-customer-algorithm
-
x-amz-server-side-encryption-customer-key
-
x-amz-server-side-encryption-customer-key-MD5
-
-
Directory bucket - For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (
AES256
) is supported.
For more information, see Using Server-Side Encryption in the Amazon S3 User Guide.
Special errors¶
-
Error Code:
NoSuchUpload
-
Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.
-
HTTP Status Code: 404 Not Found
-
SOAP Fault Code Prefix: Client
-
HTTP Host header syntax¶
Directory buckets - The HTTP Host header syntax is
Bucket_name.s3express-az_id.region.amazonaws.com
.
The following operations are related to upload_part
:
-
create_multipart_upload
-
complete_multipart_upload
-
abort_multipart_upload
-
list_parts
-
list_multipart_uploads
Usage¶
s3_upload_part(Body, Bucket, ContentLength, ContentMD5,
ChecksumAlgorithm, ChecksumCRC32, ChecksumCRC32C, ChecksumSHA1,
ChecksumSHA256, Key, PartNumber, UploadId, SSECustomerAlgorithm,
SSECustomerKey, SSECustomerKeyMD5, RequestPayer, ExpectedBucketOwner)
Arguments¶
Body
Object data.
Bucket
[required] The name of the bucket to which the multipart upload was initiated.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format
Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the formatbucket_base_name--az-id--x-s3
(for example,DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form
AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.ContentLength
Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.
ContentMD5
The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.
This functionality is not supported for directory buckets.
ChecksumAlgorithm
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding
x-amz-checksum
orx-amz-trailer
header sent. Otherwise, Amazon S3 fails the request with the HTTP status code400 Bad Request
. For more information, see Checking object integrity in the Amazon S3 User Guide.If you provide an individual checksum, Amazon S3 ignores any provided
ChecksumAlgorithm
parameter.This checksum algorithm must be the same for all parts and it match the checksum value supplied in the
create_multipart_upload
request.ChecksumCRC32
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
ChecksumCRC32C
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
ChecksumSHA1
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
ChecksumSHA256
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
Key
[required] Object key for which the multipart upload was initiated.
PartNumber
[required] Part number of part being uploaded. This is a positive integer between 1 and 10,000.
UploadId
[required] Upload ID identifying the multipart upload whose part is being uploaded.
SSECustomerAlgorithm
Specifies the algorithm to use when encrypting the object (for example, AES256).
This functionality is not supported for directory buckets.
SSECustomerKey
Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the
x-amz-server-side-encryption-customer-algorithm header
. This must be the same encryption key specified in the initiate multipart upload request.This functionality is not supported for directory buckets.
SSECustomerKeyMD5
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
This functionality is not supported for directory buckets.
RequestPayer
ExpectedBucketOwner
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code
403 Forbidden
(access denied).
Value¶
A list with the following syntax:
list(
ServerSideEncryption = "AES256"|"aws:kms"|"aws:kms:dsse",
ETag = "string",
ChecksumCRC32 = "string",
ChecksumCRC32C = "string",
ChecksumSHA1 = "string",
ChecksumSHA256 = "string",
SSECustomerAlgorithm = "string",
SSECustomerKeyMD5 = "string",
SSEKMSKeyId = "string",
BucketKeyEnabled = TRUE|FALSE,
RequestCharged = "requester"
)
Request syntax¶
svc$upload_part(
Body = raw,
Bucket = "string",
ContentLength = 123,
ContentMD5 = "string",
ChecksumAlgorithm = "CRC32"|"CRC32C"|"SHA1"|"SHA256",
ChecksumCRC32 = "string",
ChecksumCRC32C = "string",
ChecksumSHA1 = "string",
ChecksumSHA256 = "string",
Key = "string",
PartNumber = 123,
UploadId = "string",
SSECustomerAlgorithm = "string",
SSECustomerKey = raw,
SSECustomerKeyMD5 = "string",
RequestPayer = "requester",
ExpectedBucketOwner = "string"
)
Examples¶
## Not run:
# The following example uploads part 1 of a multipart upload. The example
# specifies a file name for the part data. The Upload ID is same that is
# returned by the initiate multipart upload.
svc$upload_part(
Body = "fileToUpload",
Bucket = "examplebucket",
Key = "examplelargeobject",
PartNumber = "1",
UploadId = "xadcOB_7YPBOJuoFiQ9cz4P3Pe6FIZwO4f7wN93uHsNBEw97pl5eNwzExg0LA..."
)
## End(Not run)