Put Object
s3_put_object | R Documentation |
Adds an object to a bucket¶
Description¶
Adds an object to a bucket.
-
Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket. You cannot use
put_object
to only update a single piece of metadata for an existing object. You must put the entire object with updated metadata if you want to update some values. -
If your bucket uses the bucket owner enforced setting for Object Ownership, ACLs are disabled and no longer affect permissions. All objects written to the bucket by any account will be owned by the bucket owner.
-
Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format
https://bucket_name.s3express-az_id.region.amazonaws.com/key-name
. Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.
Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. However, Amazon S3 provides features that can modify this behavior:
-
S3 Object Lock - To prevent objects from being deleted or overwritten, you can use Amazon S3 Object Lock in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
-
S3 Versioning - When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all versions of the objects. For each write request that is made to the same object, Amazon S3 automatically generates a unique version ID of that object being stored in Amazon S3. You can retrieve, replace, or delete any version of the object. For more information about versioning, see Adding Objects to Versioning-Enabled Buckets in the Amazon S3 User Guide. For information about returning the versioning state of a bucket, see
get_bucket_versioning
.This functionality is not supported for directory buckets.
Permissions¶
-
General purpose bucket permissions - The following permissions are required in your policies when your
put_object
request includes specific headers.-
s3:PutObject
- To successfully complete theput_object
request, you must always have thes3:PutObject
permission on a bucket to add an object to it. -
s3:PutObjectAcl
- To successfully change the objects ACL of yourput_object
request, you must have thes3:PutObjectAcl
. -
s3:PutObjectTagging
- To successfully set the tag-set with yourput_object
request, you must have thes3:PutObjectTagging
.
-
-
Directory bucket permissions - To grant access to this API operation on a directory bucket, we recommend that you use the
create_session
API operation for session-based authorization. Specifically, you grant thes3express:CreateSession
permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make thecreate_session
API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make anothercreate_session
API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, seecreate_session
.
Data integrity with Content-MD5¶
-
General purpose bucket - To ensure that data is not corrupted traversing the network, use the
Content-MD5
header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, Amazon S3 returns an error. Alternatively, when the object's ETag is its MD5 digest, you can calculate the MD5 while putting the object to Amazon S3 and compare the returned ETag to the calculated MD5 value. -
Directory bucket - This functionality is not supported for directory buckets.
HTTP Host header syntax¶
Directory buckets - The HTTP Host header syntax is
Bucket_name.s3express-az_id.region.amazonaws.com
.
For more information about related Amazon S3 APIs, see the following:
-
copy_object
-
delete_object
Usage¶
s3_put_object(ACL, Body, Bucket, CacheControl, ContentDisposition,
ContentEncoding, ContentLanguage, ContentLength, ContentMD5,
ContentType, ChecksumAlgorithm, ChecksumCRC32, ChecksumCRC32C,
ChecksumSHA1, ChecksumSHA256, Expires, IfNoneMatch, GrantFullControl,
GrantRead, GrantReadACP, GrantWriteACP, Key, Metadata,
ServerSideEncryption, StorageClass, WebsiteRedirectLocation,
SSECustomerAlgorithm, SSECustomerKey, SSECustomerKeyMD5, SSEKMSKeyId,
SSEKMSEncryptionContext, BucketKeyEnabled, RequestPayer, Tagging,
ObjectLockMode, ObjectLockRetainUntilDate, ObjectLockLegalHoldStatus,
ExpectedBucketOwner)
Arguments¶
ACL
The canned ACL to apply to the object. For more information, see Canned ACL in the Amazon S3 User Guide.
When adding a new object, you can use headers to grant ACL-based permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. By default, all objects are private. Only the owner has full access control. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API in the Amazon S3 User Guide.
If the bucket that you're uploading objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the
bucket-owner-full-control
canned ACL or an equivalent form of this ACL expressed in the XML format. PUT requests that contain other ACLs (for example, custom grants to certain Amazon Web Services accounts) fail and return a400
error with the error codeAccessControlListNotSupported
. For more information, see Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.This functionality is not supported for directory buckets.
This functionality is not supported for Amazon S3 on Outposts.
Body
Object data.
Bucket
[required] The bucket name to which the PUT action was initiated.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format
Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the formatbucket_base_name--az-id--x-s3
(for example,DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form
AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.CacheControl
Can be used to specify caching behavior along the request/reply chain. For more information, see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.9.
ContentDisposition
Specifies presentational information for the object. For more information, see https://www.rfc-editor.org/rfc/rfc6266#section-4.
ContentEncoding
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field. For more information, see https://www.rfc-editor.org/rfc/rfc9110.html#field.content-encoding.
ContentLanguage
The language the content is in.
ContentLength
Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically. For more information, see https://www.rfc-editor.org/rfc/rfc9110.html#name-content-length.
ContentMD5
The base64-encoded 128-bit MD5 digest of the message (without the headers) according to RFC 1864. This header can be used as a message integrity check to verify that the data is the same data that was originally sent. Although it is optional, we recommend using the Content-MD5 mechanism as an end-to-end integrity check. For more information about REST request authentication, see REST Authentication.
The
Content-MD5
header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information about Amazon S3 Object Lock, see Amazon S3 Object Lock Overview in the Amazon S3 User Guide.This functionality is not supported for directory buckets.
ContentType
A standard MIME type describing the format of the contents. For more information, see https://www.rfc-editor.org/rfc/rfc9110.html#name-content-type.
ChecksumAlgorithm
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding
x-amz-checksum-algorithm
orx-amz-trailer
header sent. Otherwise, Amazon S3 fails the request with the HTTP status code400 Bad Request
.For the
x-amz-checksum-algorithm
header, replacealgorithm
with the supported algorithm from the following list:CRC32
CRC32C
SHA1
SHA256
For more information, see Checking object integrity in the Amazon S3 User Guide.
If the individual checksum value you provide through
x-amz-checksum-algorithm
doesn't match the checksum algorithm you set throughx-amz-sdk-checksum-algorithm
, Amazon S3 ignores any providedChecksumAlgorithm
parameter and uses the checksum algorithm that matches the provided value inx-amz-checksum-algorithm
.For directory buckets, when you use Amazon Web Services SDKs,
CRC32
is the default checksum algorithm that's used for performance.ChecksumCRC32
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
ChecksumCRC32C
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
ChecksumSHA1
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
ChecksumSHA256
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
Expires
The date and time at which the object is no longer cacheable. For more information, see https://www.rfc-editor.org/rfc/rfc7234#section-5.3.
IfNoneMatch
Uploads the object only if the object key name does not already exist in the bucket specified. Otherwise, Amazon S3 returns a
412 Precondition Failed
error.If a conflicting operation occurs during the upload S3 returns a
409 ConditionalRequestConflict
response. On a 409 failure you should retry the upload.Expects the '*' (asterisk) character.
For more information about conditional requests, see RFC 7232, or Conditional requests in the Amazon S3 User Guide.
GrantFullControl
Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
This functionality is not supported for directory buckets.
This functionality is not supported for Amazon S3 on Outposts.
GrantRead
Allows grantee to read the object data and its metadata.
This functionality is not supported for directory buckets.
This functionality is not supported for Amazon S3 on Outposts.
GrantReadACP
Allows grantee to read the object ACL.
This functionality is not supported for directory buckets.
This functionality is not supported for Amazon S3 on Outposts.
GrantWriteACP
Allows grantee to write the ACL for the applicable object.
This functionality is not supported for directory buckets.
This functionality is not supported for Amazon S3 on Outposts.
Key
[required] Object key for which the PUT action was initiated.
Metadata
A map of metadata to store with the object in S3.
ServerSideEncryption
The server-side encryption algorithm that was used when you store this object in Amazon S3 (for example,
AES256
,aws:kms
,aws:kms:dsse
).General purpose buckets - You have four mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS or DSSE-KMS), and customer-provided keys (SSE-C). Amazon S3 encrypts data with server-side encryption by using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest by using server-side encryption with other key options. For more information, see Using Server-Side Encryption in the Amazon S3 User Guide.
Directory buckets - For directory buckets, only the server-side encryption with Amazon S3 managed keys (SSE-S3) (
AES256
) value is supported.StorageClass
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.
For directory buckets, only the S3 Express One Zone storage class is supported to store newly created objects.
Amazon S3 on Outposts only uses the OUTPOSTS Storage Class.
WebsiteRedirectLocation
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata. For information about object metadata, see Object Key and Metadata in the Amazon S3 User Guide.
In the following example, the request header sets the redirect to an object (anotherPage.html) in the same bucket:
x-amz-website-redirect-location: /anotherPage.html
In the following example, the request header sets the object redirect to another website:
x-amz-website-redirect-location: http://www.example.com/
For more information about website hosting in Amazon S3, see Hosting Websites on Amazon S3 and How to Configure Website Page Redirects in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
SSECustomerAlgorithm
Specifies the algorithm to use when encrypting the object (for example,
AES256
).This functionality is not supported for directory buckets.
SSECustomerKey
Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the
x-amz-server-side-encryption-customer-algorithm
header.This functionality is not supported for directory buckets.
SSECustomerKeyMD5
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
This functionality is not supported for directory buckets.
SSEKMSKeyId
If
x-amz-server-side-encryption
has a valid value ofaws:kms
oraws:kms:dsse
, this header specifies the ID (Key ID, Key ARN, or Key Alias) of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object. If you specifyx-amz-server-side-encryption:aws:kms
orx-amz-server-side-encryption:aws:kms:dsse
, but do not providex-amz-server-side-encryption-aws-kms-key-id
, Amazon S3 uses the Amazon Web Services managed key (aws/s3
) to protect the data. If the KMS key does not exist in the same account that's issuing the command, you must use the full ARN and not just the ID.This functionality is not supported for directory buckets.
SSEKMSEncryptionContext
Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs. This value is stored as object metadata and automatically gets passed on to Amazon Web Services KMS for future
get_object
orcopy_object
operations on this object. This value must be explicitly added duringcopy_object
operations.This functionality is not supported for directory buckets.
BucketKeyEnabled
Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using Key Management Service (KMS) keys (SSE-KMS). Setting this header to
true
causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.Specifying this header with a PUT action doesn’t affect bucket-level settings for S3 Bucket Key.
This functionality is not supported for directory buckets.
RequestPayer
Tagging
The tag-set for the object. The tag-set must be encoded as URL Query parameters. (For example, "Key1=Value1")
This functionality is not supported for directory buckets.
ObjectLockMode
The Object Lock mode that you want to apply to this object.
This functionality is not supported for directory buckets.
ObjectLockRetainUntilDate
The date and time when you want this object's Object Lock to expire. Must be formatted as a timestamp parameter.
This functionality is not supported for directory buckets.
ObjectLockLegalHoldStatus
Specifies whether a legal hold will be applied to this object. For more information about S3 Object Lock, see Object Lock in the Amazon S3 User Guide.
This functionality is not supported for directory buckets.
ExpectedBucketOwner
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code
403 Forbidden
(access denied).
Value¶
A list with the following syntax:
list(
Expiration = "string",
ETag = "string",
ChecksumCRC32 = "string",
ChecksumCRC32C = "string",
ChecksumSHA1 = "string",
ChecksumSHA256 = "string",
ServerSideEncryption = "AES256"|"aws:kms"|"aws:kms:dsse",
VersionId = "string",
SSECustomerAlgorithm = "string",
SSECustomerKeyMD5 = "string",
SSEKMSKeyId = "string",
SSEKMSEncryptionContext = "string",
BucketKeyEnabled = TRUE|FALSE,
RequestCharged = "requester"
)
Request syntax¶
svc$put_object(
ACL = "private"|"public-read"|"public-read-write"|"authenticated-read"|"aws-exec-read"|"bucket-owner-read"|"bucket-owner-full-control",
Body = raw,
Bucket = "string",
CacheControl = "string",
ContentDisposition = "string",
ContentEncoding = "string",
ContentLanguage = "string",
ContentLength = 123,
ContentMD5 = "string",
ContentType = "string",
ChecksumAlgorithm = "CRC32"|"CRC32C"|"SHA1"|"SHA256",
ChecksumCRC32 = "string",
ChecksumCRC32C = "string",
ChecksumSHA1 = "string",
ChecksumSHA256 = "string",
Expires = as.POSIXct(
"2015-01-01"
),
IfNoneMatch = "string",
GrantFullControl = "string",
GrantRead = "string",
GrantReadACP = "string",
GrantWriteACP = "string",
Key = "string",
Metadata = list(
"string"
),
ServerSideEncryption = "AES256"|"aws:kms"|"aws:kms:dsse",
StorageClass = "STANDARD"|"REDUCED_REDUNDANCY"|"STANDARD_IA"|"ONEZONE_IA"|"INTELLIGENT_TIERING"|"GLACIER"|"DEEP_ARCHIVE"|"OUTPOSTS"|"GLACIER_IR"|"SNOW"|"EXPRESS_ONEZONE",
WebsiteRedirectLocation = "string",
SSECustomerAlgorithm = "string",
SSECustomerKey = raw,
SSECustomerKeyMD5 = "string",
SSEKMSKeyId = "string",
SSEKMSEncryptionContext = "string",
BucketKeyEnabled = TRUE|FALSE,
RequestPayer = "requester",
Tagging = "string",
ObjectLockMode = "GOVERNANCE"|"COMPLIANCE",
ObjectLockRetainUntilDate = as.POSIXct(
"2015-01-01"
),
ObjectLockLegalHoldStatus = "ON"|"OFF",
ExpectedBucketOwner = "string"
)
Examples¶
## Not run:
# The following example uploads an object. The request specifies optional
# request headers to directs S3 to use specific storage class and use
# server-side encryption.
svc$put_object(
Body = "HappyFace.jpg",
Bucket = "examplebucket",
Key = "HappyFace.jpg",
ServerSideEncryption = "AES256",
StorageClass = "STANDARD_IA"
)
# The following example creates an object. If the bucket is versioning
# enabled, S3 returns version ID in response.
svc$put_object(
Body = "filetoupload",
Bucket = "examplebucket",
Key = "objectkey"
)
# The following example uploads an object to a versioning-enabled bucket.
# The source file is specified using Windows file syntax. S3 returns
# VersionId of the newly created object.
svc$put_object(
Body = "HappyFace.jpg",
Bucket = "examplebucket",
Key = "HappyFace.jpg"
)
# The following example uploads an object. The request specifies optional
# object tags. The bucket is versioned, therefore S3 returns version ID of
# the newly created object.
svc$put_object(
Body = "c:\\HappyFace.jpg",
Bucket = "examplebucket",
Key = "HappyFace.jpg",
Tagging = "key1=value1&key2=value2"
)
# The following example uploads and object. The request specifies optional
# canned ACL (access control list) to all READ access to authenticated
# users. If the bucket is versioning enabled, S3 returns version ID in
# response.
svc$put_object(
ACL = "authenticated-read",
Body = "filetoupload",
Bucket = "examplebucket",
Key = "exampleobject"
)
# The following example creates an object. The request also specifies
# optional metadata. If the bucket is versioning enabled, S3 returns
# version ID in response.
svc$put_object(
Body = "filetoupload",
Bucket = "examplebucket",
Key = "exampleobject",
Metadata = list(
metadata1 = "value1",
metadata2 = "value2"
)
)
# The following example uploads an object. The request specifies the
# optional server-side encryption option. The request also specifies
# optional object tags. If the bucket is versioning enabled, S3 returns
# version ID in response.
svc$put_object(
Body = "filetoupload",
Bucket = "examplebucket",
Key = "exampleobject",
ServerSideEncryption = "AES256",
Tagging = "key1=value1&key2=value2"
)
## End(Not run)